粉碎設備 混合設備 分離設備 濃縮結晶設備 傳質設備 干燥設備 反應設備 換熱設備 制冷設備 空分設備 儲存設備 鍋爐|加熱設備 包裝機械 輸送設備 化工實驗室設備
常州市寧河干燥設備有限公司
常州市寧河干燥設備有限公司
濕物料從干燥機一端投入后,在內筒均布的抄板器翻動下，物料在干燥器內均勻分布與分散，并與并流(逆流)的熱空氣充分接觸，加快了干燥傳熱，傳至推動力。在干燥過程中，物料在帶有傾斜度的抄板和熱氣流的作用下，可調控地運動至干燥機另段星形卸料閥排出成品。
After wet materials are put in from one end of the dryer, the materials are evenly distributed and dispersed in the dryer under the turning of the paper-making machines evenly distributed in the inner cylinder, and are fully contacted with the hot air flowing in parallel (countercurrent), thus accelerating the drying heat transfer and transmitting to the driving force. In the drying process, the material can move to the other star-shaped discharge valve of the dryer to discharge the finished product under the action of the inclined papermaking plate and hot air flow.
1.化工、礦山、冶金等行業大顆粒，比重大物料干燥，如:礦山、高爐礦渣、煤、金屬粉末、磷肥、硫銨。
2.對有特殊要求的粉末、顆粒狀物料的干燥，如:Hp發泡劑、酒糟渣、輕質碳酸鈣、活性白土、磁粉、石墨、藥渣。
3.要求低溫干燥，且需大批量連續干燥的物料。
1. Large particles in chemical, mining and metallurgical industries are drier than majormaterials, such as mine, blast furnace slag, coal, metal powder, phosphate fertilizer and ammonium sulfate.
2. Drying powder and granular materials with special requirements, such as Hp foaming agent, distiler's grains residue, light calcium carbonate, activated clay, magnetic powder, graphite and dregs.
3. Materials requiring low-temperature drying and continuous drying in large quantities.
轉筒干燥器機械化程度高，生產能力較大。
流體通過筒體阻力小，功能消耗低。
對物料特性的適應性比較強。
操作穩定，操作費用較低，產品干燥的均勻性好。.
Rotary drum dryer has high mechanization degree and large production capacity.
The resistance of fluid passing through the cylinder is small and the function consumption is low.
Strong adaptability to material characteristics.
Stable operation, low operation cost and good uniformity of product drying.
| 規格(m) | 生產能力 (t/h) | 筒體速度 (r/min) | 電機功率 (kw) | 安裝角度 (0 | 出料濕度 |
| Φ1.0x5.0 | 0.5-1.2 | 0.6-6 | 4 | 3-5 | ≤1.5% |
| Φ1.2x6-10 | 1.5-3 | 0.6-6 | 5.5 | 3-5 | ≤1.5% |
| Φ1.5x12-18 | 3-5.5 | 0.6-6 | 15 | 3-5 | ≤1.5% |
| Φ1.8x12-18 | 5-6.5 | 0.6-6 | 18.5 | 3-5 | ≤1.5% |
| Φ2.2x12-22 | 7-12 | 0.6-6 | 22 | 3-5 | ≤1.5% |
| Φ2.4x15-20 | 9-15 | 0.6-6 | 30 | 3-5 | ≤1.5% |
| Φ3.0x25 | 16 | 0.6-6 | 55 | 3-5 | ≤1.5% |
| 型號 | 直接加熱順流式 | 直接加熱順流式 | 直接加熱逆流式 | 直接加熱逆流式 | 復合加熱 | 復合加熱 |
| 物料種類 | 礦石 | HP發泡劑 | 高爐礦渣 | 硫銨 | 磷肥 | 煤 |
| 處理量(Kg/h) | 1000 | 466 | 15000 | 20000 | 12000 | 5000 |
| 初含水量(%) | 30 | 13 | 6 | 1.5 | 5 | 6.5 |
| 終含水量(%) | 15 | 0.3 | 1 | 0.1 | 0.1 | 0.1 |
| 平均粒徑(mm) | 6.5 | 0.05 | 4.7 | 0.5-0.7 | 0.5 | 5 |
| 物料堆積重度 kg/㎡ | 770 | 800 | 1890 | 1100 | 1500 | 750 |
| 熱風度(㎡/kg) | 39000 | 5400 | 10750 | 9800 | 6500 | 16000 |
| 入口氣體溫度(℃) | 600 | 165 | 500 | 180 | 650 | 570 |
| 物料出口溫度(℃) | | 42 | 100 | 70 | 80 | 75 |
| 加熱方式 | 煤氣 | 蒸氣式電加熱 | 重油 | 燃煤熱風機coal | 重油 | 重油 |
| 裝料系數(%) | | 6.3 | 7 | 7.5 | 7.8 | 18 |
| 轉速(r.p.m) | 4 | 4 | 3.5 | 3 | 4 | 2 |
| 傾斜度(m/m) | 0.04 | 0.005 | 0.03 | 0.05 | 0.05 | 0.043 |
| 抄板數目 | 12 | 24 | 12 | 22 | 內筒外面8外筒內面16 | 6 2 |
| 干燥器直徑 (m) | 2.0 | 1.5 | 2 | 2.3 | 外筒2內筒0.84 | 外筒2.4內筒0.95 |
| 干燥器長度(m) | 20 | 12 | 17 | 15 | 10 | 16 |
| 驅動功率(kw) | 22 | 7.5 | 15 | 11 | 11 | 15 |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
化工機械設備網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
