安捷倫/賽默飛液質聯用氮氣發生器操作流程

開機后能正常工作，但工作過程中壓力下降達不到設定壓力，壓縮機不啟動 此類故障般由熱保護引起，容易引起熱保護的有：

1、進氣口堵塞(清洗空氣過濾器)、

2、壓縮機缺油(加入18號冷凍機油200克)。

3、單向閥漏氣導致啟動壓力過高(更換單向閥)

安捷倫/賽默飛液質聯用氮氣發生器產品簡介

Anyan品牌氮氣發生器是種*的氣體分離技術，以韓進口膜分離空氣制取高純度的氮氣，空氣經壓縮機壓縮過濾后進入高分子膜過濾器，由于各種氣體在膜中溶解度和擴散系數不同，導致不同氣體在膜中相對滲透速率不同，在定壓力條件下，利用氧和氮等不同性質的氣體在膜中具有不同的滲透速率來使氧和氮分離。和其它制氮設備相比它具有結構更為簡單、體積更小、無切換閥門、維護量更少、產氣更快(≤3分鐘)、增容方便等優點。更多詳細資料請與喬躍小馬

產品特點

高純度氮氣發生，氮氣發生器選購指南

1. 韓進口膜分離，純度高，使用壽命長，無耗材更換。

2. 內置業除水分離器，確保吸附劑的使用壽命長。

3.采用多超精密高通量壓縮空氣凈化系統，且帶過濾單元失效預警提示

3. 氮氣純度顯示，可清晰觀察機器產氮氣的純度，精度高。

4. 內置壓縮機，無需外配，24小時不間斷工作，且采用懸空隔音系統，噪音小。

5. 雙重壓力值可調系統，操作簡單方便

6. 采用體式設計，整機集成空壓機、凈化除水系統、氮氣，干燥空分離制備系統，

8.程序控制智能化的自診斷功能和服務提示功能，便于維護

9.高度集成的模塊化結構設計，節省實驗室空間

10.系統內置貯氣罐穩壓單元，帶際標準的安全閥設計

11.帶腳輪可移動式設計，方便移動。

產品選型

1.產品型號：AYAN-30L1

1、氮氣流量≥30L/min,

2、氮氣純度：99%～99.99%

3、輸出壓力：105psi，可任意調節

4、無液滴殘留、無鄰苯二甲酸酯類化合物殘留、顆粒物小于0.01um、壓力露點<-40℃

5、噪音;<56分貝

6、大功率：1700W

7、規格尺寸：700mmX500mmX1000mm

8、重量;150kg

產品相冊

公司介紹

Welcome new and old customers to consult, need or have no understanding of our products at any time to consult us, we are happy to serve you.

After-sales service guarantee

As a kind of professional test equipment, the test equipment has relatively high requirements on the test environment and configuration, which have certain requirements and n their corresponding standards. Moreover, the test results of the same test in different test environments and configuration conditions will also have great differences. Therefore, As an experimental equipment manufacturer, Shanghai Qiaoyue Electronics Co., Ltd. hereby makes the following guarantees for the instruments sold:

1. Send professional technicians with rich experience in the field of experiment to guide users in the use, maintenance and test configuration of their equipment.

2. Within one month after the acceptance of the equipment by the Demander, if the equipment fails and the supplier fails to repair or repair the equipment for two times, the Supplier shall unconditionally guarantee the replacement within 5 working days.

3. From the date of official acceptance, the supplier shall provide free (including the cost of equipment and materials) warranty service. The period of free quality warranty service is 1 year and lifetime maintenance. Within the warranty period, in case of product failure caused by the supplier's product quality problem, the supplier shall respond within half an hour, provide services, guide the customer to use, and be responsible for free maintenance.